Error Code 43 - How To Fix USB Device Not Recognized - Qiling  

How to Fix Error Code 43 for USB in Windows 10 & Recover Data


How do I fix Code 43 Error and make my storage device work again? On this page, we'll provide a complete guide to help you effectively resolve the USB flash drive error code 43 issue without losing any data.

Fixes Code 43 Error on USB/External Hard Drive in Windows 10

3 Quick Tips to Fix Code 43 Error:

After this, open disk management and see if your drive is detectable. If yes, turn to reliable data recovery software as shown at the end of this page to recover all your precious data first.

If the error code 43 still exists on your USB or other devices, there are four effective ways for you to apply:

Workable Solutions Step-by-step Troubleshooting
Fix 1. Update Device Driver Update the device driver > roll back the USB driver > reinstall the device driver...Full steps
Fix 2. Reinstall USB Hub Driver Go to the "Driver" tab and choose "Disable Device" > "Enable Device"...Full steps
Fix 3. Re-enable the Device Go to the "Driver" tab and choose "Disable Device" > "Enable Device"...Full steps

Error: Unknown Device - Windows Has Stopped This Device with Code 43

Don't worry if your USB flash drive or external USB drive is not recognized due to Code 43 error

Code 43 in Windows 10

What is Error Code 43?

Code 43 error, it's one of the Device Manager error codes which says "Windows has stopped this device because it has reported problems. (Code 43)".

What happens if Code 43 exists on your device?

When you get error code 43 with your USB or other hardware devices, your devices will properly become:

So how to fix this error and make your drive work properly again? In the next part, we'll guide you to address this issue effectively.

Method 1. Update Device Driver to Fix Unrecognized Code 43 Device

Difficulty Level: Easy Risky Level: Low

If your USB has a hardware problem or its driver or driver software is falling, you can try to install the latest drivers for your USB drive. It's very likely that installing the latest drivers for the device will remove the code 43 error.

Option 1. Update USB/Device Driver

Step 1. Go to "Search", type device manager, and choose "Device Manager" from the result. 

Step 2. Find and right-click the problematic device and choose "Properties".

Step 3. Click "Driver" and then choose "Update Driver".

Step 4. Click "Search automatically for updated driver software".

Fix Code 43 in Windows 10 - update driver

Solution 2. Roll Back the USB Driver

If you have updated the device driver before the error code 43 occur, rolling back the device driver could be one of the choices to fix the issue.

Step 1. Open "Device Manager".

Step 2. Right-click your device driver and choose "Properties".

Step 3. Go to "Driver" > "Roll Back Driver".

Fix Code 43 in Windows 10 - Roll Back Driver

Method 2. Reinstall the Device Driver to Fix Code 43 Error

Difficulty Level: Easy Risky Level: Low

Some users have also reported that reinstalling the device driver to fix error code 43 in Windows 10. Try to uninstall and then reinstall your USB driver:

Step 1. Press Windows + S keys, search Device Manager, and click to open it. 

Step 2. Expand disk drive and right-click the malfunctioning device, and then click "Uninstall".

Uninstall problematic device

When a warning message appears that you are uninstalling a device from your system, click "OK". 

Step 3. Right-click your computer name in Device Manager and click "Scan for hardware changes".

The Device Manager scans your system and automatically reinstalls your device.

Step 4. Right-click the device and click "Properties".

Step 5. On the General tab of the device Properties dialog box, in Device status, you should see the message "This device is working properly".

Fix Code 43 for USB in Windows 10 - Reinstall Device Driver

Method 3. Re-enable the Device to Remove Code 43 Error

Difficulty Level: Easy Risky Level: Low

If you have tried method 2, you may be quite familiar with Device Manager now. To re-enable your USB, you just need to go to:

Step 1.  Open Device Manager, expand Disk drives.

Step 2. Right-click the problematic device with Code 43 error, select "Disable Device".

Step 3. Click "Yes" to confirm.

Step 4. Re-click the device and select "Enable Device".

Re-enable device to fix Code 43 Error

Step 5. Restart the computer to keep all changes.

After this, you can check if your device is functioning properly now. 

Notice:
Note that if your device is still with Code 43 error, follow the next part to get your data out of the device and replace with a new portable storage device. If necessary, bring the device for repair.

IMPORTANT: Recover Data from USB with Code 43 Error  in Windows 10

For the case that code 43 USB error may cause Windows OS to fail to detect or recognize USB drive, making USB data inaccessible. It's quite necessary to learn to recover data from a not-recognized external drive.

As long as your device can be detected by Disk Management, you can recover lost, inaccessible, unreadable data from external USB flash drives with Code 43 error.

Here, reliable hard drive recovery software - Deep Data Recovery can help.

You get back data from code 43 error USB in Windows 10 within minutes:

Step 1. Select file types and click "Next" to start

Launch Deep Data Recovery software. Select file types and click "Next" to start.

Select file types that you want to recover

Step 2. Choose the USB drive to scan

Choose your USB drive where you lost important files. Click "Scan" to start.

select the USB drive

Step 3. Check and preview USB drive data

When the scanning is finished, you can quickly locate a specific type of file by using the Filter feature as well as the Search option.

Scan and find lost flash drive files

Step 4. Restore flash drive data

After checking and finding lost USB drive files, click "Recover" to restore them. You shall save the found files to a safe location on your PC rather than to your USB drive.

Conclusion

On this page, we collected 3 quick fixes and 3 reliable methods to help you fix the Code 43 error on your storage devices like USB, external hard drive, or even hard disk.

During the process, we suggest you turn to Qiling data recovery software to restore the important data as soon as the device is detectable.

Also, it's important that you turn to third-party system backup software like Qiling Backup to create a regular backup of all your valuable files.

Related Articles


Is this information helpful?     

What can we do to improve this information? (Optional)
Refresh Please enter the verification code!